SYNTEZ Device: Zoom G5n Firmware: 3.00 Name on device: SYNTHEZ Optimized for: Phones/Speaker Effects chain: Patch comments: ==RICK GOODBUY==CODA = Octave--Phaser--TS Drive--DYN Drive--StereoCho--Delay-- HD Hall = Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 100"Threshold" = 59"Decay" = 0 Effect: "PDL Roto" (Pedal), active - "yes" "Mode" = SLOW"Drive" = 20"Balance" = 50"Volume" = 100 Effect: "Phaser" (Modulation), active - "yes" "Color" = 4 STG"Depth" = 40"Rate" = 12"Resonance" = 50 Effect: "RC Boost" (Overdrive / Distortion), active - "yes" "Gain" = 90"Bass" = 3"Treble" = 100"Volume" = 100 Effect: "HG THRTTL" (Overdrive / Distortion), active - "yes" "Gain" = 69"Tone" = 83"MdCut" = 46"Volume" = 80 Effect: "StereoCho" (Modulation), active - "yes" "Depth" = 37"Rate" = 50"Tone" = 10"Mix" = 100 Effect: "Delay" (Delay), active - "yes" "Time" = 42"F.B." = 25"Mix" = 10"Tail" = On Effect: "Output VP" (Pedal), active - "yes" Patch Volume: 91 DSP Load: 72% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
There is SwellVibe in the chain, but Ton Lib doesn't see it( ZNR PDL Roto Phaser RC Boost HG THRTTL SwellVibe StereoCho Delay Output VP here are my experiments, although, of course, the zoom G3 had much richer capabilities https://disk.yandex.ru/d/1SzWgECi86jFBg