synthwave 2.0 Preset name: synthwave Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 100"Tone" = 100"Level" = 100} Effect: "Org Crush" (Amp simulators), active - "yes" { "Gain" = 85"Bass" = 30"Middle" = 5"Treble" = 60"Presence" = 55"Master" = 70"Level (dB)" = 2} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = sandman_stereo_IR"Low Cut (Hz)" = 250"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 6} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -75"A-Level" = 55"B-Bypass" = Off"B-Pan" = 75"B-Level" = 55"A-Delay" = 0"B-Delay" = 0"Width" = 0 'A' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = OD-R112-V30-SM58-P05-20"Low Cut (Hz)" = 134"Hi Cut (kHz)" = 15.0"Mix" = 100"Level (dB)" = 8} } 'B' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = OD-R112-V30-SM58-P09-40"Low Cut (Hz)" = 124"Hi Cut (kHz)" = 15.5"Mix" = 100"Level (dB)" = 8} } } Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -4"62 Hz" = -2"125 Hz" = -6"250 Hz" = -7"500 Hz" = -2"1 kHz" = -8"2 kHz" = -8"4 kHz" = -8"8 kHz" = -8"16 kHz" = 10"Level (dB)" = 6} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 2.5"Depth" = 32"Center" = 10.0"Mix" = 25} Effect: "Plate Rvb" (Reverberation), active - "yes" { "Time" = 10.0"PreDelay" = 22"LoDamp" = 100"HiDamp" = 100"Mix" = 22} Effect: "Bass Drive" (Overdrive / Distortion), active - "no" { "Drive" = 100"Blend" = 63"Presence" = 60"Bass" = 96"Middle" = 100"Treble" = 62"Level" = 100} Note: You will need to download and install the ToneLib-GFX software to use the preset.
