Tang Device: Zoom G5n Firmware: 3.00 Name on device: Tang Optimized for: Phones/Speaker Effects chain: Patch comments: Orange gritty but clean drive Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 100"Threshold" = 19"Decay" = 0 Effect: "OutputBST" (Overdrive / Distortion), active - "no" "Range" = 7"Boost" = 32"Tone" = 48"Volume" = 89 Effect: "SweetDrv" (Overdrive / Distortion), active - "yes" "Gain" = 33"Tone" = 67"Focus" = 89"Volume" = 62 Effect: "ORG120" (Amp simulator), active - "yes" "Input" = HI"Color" = 2"Bass" = 38"Treble" = 49"Presence" = 71"Gain" = 55"Volume" = 57"SOLO" = 3 Effect: "Exciter" (Filter), active - "yes" "Bass" = 12"Treble" = 27"Volume" = 80"ON/OFF" = LATCH Effect: "BGN4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 71"Hi" = 53"Lo" = 50 Effect: "P-P Delay" (Delay), active - "yes" "Time" = 560"F.B." = 30"Mix" = 45"Tail" = Off Patch Volume: 74 DSP Load: 92% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
