The Death Tone Preset name: Death Comments: The real one Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 100"Tone" = 100"Level" = 100} Effect: "Ms JCM900" (Amp simulators), active - "yes" { "Gain" = 83"Bass" = 61"Middle" = 44"Treble" = 84"Presence" = 100"Master" = 100"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = S beta RAW_bipMONO_dc"Low Cut (Hz)" = 87"Hi Cut (kHz)" = 15.5"Mix" = 100"Level (dB)" = 0} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 30} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 2"400 Hz" = 2"800 Hz" = -3"1.6 kHz" = -2"3.2 kHz" = 1"6.4 kHz" = 4"12 kHz" = 3"Level (dB)" = 2} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 3.0"Depth" = 58"Center" = 6.1"Mix" = 48} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 350"Feedback" = 68"Tone" = 100"LoDamp" = 55"Mix" = 20} Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 8.7"PreDelay" = 32"LoDamp" = 100"HiDamp" = 22"Mix" = 62} Note: You will need to download and install the ToneLib-GFX software to use the preset.
