tool bass preset Preset name: tool bass Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 50"Mode" = Hard} Effect: "PitchShift" (Modulation / Sfx), active - "no" { "Pitch" = 0"Fine" = 10"Tracking" = 100"Direct" = 100"Effect" = 100} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 68"Level" = 50} Effect: "Flanger" (Modulation / Sfx), active - "yes" { "Speed" = 1.0"Depth" = 74"Reso" = 56"Center" = 7.7"Offset" = 0.0"Mix" = 45"Reset" = On} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = 0"500 Hz" = 0"1 kHz" = 5"2 kHz" = 5"4 kHz" = 5"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -50"A-Level" = 31"B-Bypass" = Off"B-Pan" = 50"B-Level" = 46"A-Delay" = 0"B-Delay" = 0"Width" = 0 'A' branch: { Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 4"62 Hz" = 4"125 Hz" = 3"250 Hz" = -1"500 Hz" = -4"1 kHz" = -2"2 kHz" = 0"4 kHz" = 3"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Effect: "Bass SVT" (Amp simulators), active - "yes" { "Bass Ctrl" = UltraLo"Midrange" = 200 Hz"Ultra Hi" = Off"Bass" = 3"Middle" = 2"Treble" = 0"Volume" = 50"Level (dB)" = 0} Effect: "Bass IRs Cab" (Cabinets), active - "yes" { "Model" = Ampeg SVT 810e (8x10")"Mic Position" = Center"Mic Distance" = Near"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 4.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "R-Dist" (Overdrive / Distortion), active - "yes" { "Drive" = 19"Tone" = 89"Level" = 50} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = -10"125 Hz" = -10"250 Hz" = 0"500 Hz" = 0"1 kHz" = 5"2 kHz" = 3"4 kHz" = 3"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 0} Effect: "Bass SVT" (Amp simulators), active - "yes" { "Bass Ctrl" = Off"Midrange" = 200 Hz"Ultra Hi" = Off"Bass" = 0"Middle" = 0"Treble" = 2"Volume" = 50"Level (dB)" = 0} Effect: "Guitar Cab HD" (Cabinets), active - "yes" { "Model" = Mesa Rectifier (4x12")"Mic Model" = Dynamic SM57"Mic Position" = Edge"Mic Distance" = Middle"Low Cut (Hz)" = 150"Hi Cut (kHz)" = 6.0"Mix" = 100"Level (dB)" = 0} } } Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = 0"500 Hz" = 0"1 kHz" = 0"2 kHz" = 0"4 kHz" = 0"8 kHz" = 0"16 kHz" = 0"Level (dB)" = 3} Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 460"Feedback" = 35"Tone" = 49"Mix" = 69} Note: You will need to download and install the ToneLib-GFX software to use the preset.
