WSP

Discussion in 'Zoom G1/G1X Four' started by REINALDO VIEIRA, Dec 30, 2025 at 4:22 PM.

  1. REINALDO VIEIRA

    REINALDO VIEIRA New Member

    WSP

    [​IMG]
    Device: Zoom G1 Four
    Firmware: 2.00

    Name on device: WRSHP SWEL
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    ('cvt_dev' patch):


    Effect: "SuperCho" (Modulation), active - "yes"
    "Depth" = 65
    "Rate" = 25
    "Tone" = 50
    "Mix" = 100

    Effect: "MATCH30" (Amp simulator), active - "yes"
    "Gain 1" = 30
    "Bass 1" = 50
    "Treble 1" = 40
    "Gain 2" = OFF
    "Tone 2" = 0
    "Cut" = 0
    "Volume" = 50

    Effect: "MA2x12" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 0
    "Hi" = 30
    "Lo" = 60

    Effect: "HD Hall" (Reverb), active - "yes"
    "PreD" = 1
    "Decay" = 40
    "Mix" = 60
    "Tail" = On

    Patch Volume: 100
    DSP Load: 78%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    • WSP.zg1f
      File size:
      521 bytes
      Views:
      3