Yngwie Lead tone Preset name: Yngwie lead tone Comments: Later i´ll upload the rithym tone Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 50"Level" = 50} Effect: "Phaser" (Modulation / Sfx), active - "no" { "Model" = Boss PH-3"Speed" = 4.1"Depth" = 100"Reso" = 52"Freq" = 2.3} Effect: "Dist One" (Overdrive / Distortion), active - "yes" { "Drive" = 100"Tone" = 100"Level" = 100} Effect: "Ms JTM45" (Amp simulators), active - "yes" { "Gain" = 100"Bass" = 68"Middle" = 44"Treble" = 100"Presence" = 100"Master" = 100"Level (dB)" = 2} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Krank Rev1 (2x12")"Mic Position" = Edge"Mic Distance" = Middle"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Chorus St" (Modulation / Sfx), active - "no" { "Speed" = 1.9"Depth" = 31"Center" = 4.4"Mix" = 40} Effect: "TapeEcho" (Delay), active - "no" { "Time" = 560"Feedback" = 38"Tone" = 65"LoDamp" = 19"Mix" = 65} Effect: "Hall Rvb" (Reverberation), active - "yes" { "Time" = 6.9"PreDelay" = 0"LoDamp" = 0"HiDamp" = 17"Mix" = 44} Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 703"Feedback" = 34"Tone" = 65"Mix" = 65} Note: You will need to download and install the ToneLib-GFX software to use the preset.