Hack for G1on and G1Xon and other Zoom

The additional effects that are MS50 and MS70CDR are compatible with the G1on/g1Xon.
Some of them are already in the G1on/G1Xon.
Maybe at some point there is a version of ToneLib in which the non-standard effects in the G1on/G1Xon can also be selected from the MS50 and MS70CDR.
It should be possible, because the software "Zoom Effect Manager" writes it in the right format in the G1on/G1Xon.
And the effects of all devices must be stored in the "Zoom Effect Manager," since you do not need any further software.
Maybe the "Zoom Effect Manager" is a good source for ToneLib to take over the data.

 

@ Guuz,

if it´s writing, the changes must be writing to the Device !

If you do all things step by step from my lesson from posting 10 , then it must write the changes.

There isen´t a write protektion on the flash Memory !

Do it again step by step from my lesson ( Posting 10 )

Other user has do it too and it have work.

Greetings Michael / Mikel


P.s.

Here is a new Video from a nother User, to make it komplet all step´s.



Stop :

I think, i know your problem !!!!

You can´t see the changes with the Program ToneLib !!!!

You can see the changes only, if you edit your patch on the device !!!

 

@ Guuz.
Is your problem solved?

 

@ tezbo,
this is a misunderstanding!
I didn't do the program, I only discovered the program by accident on the Internet and thought, I'll try it out if it works.
It was programmed in Russia, because someone made the effort and work, not me!
When it worked, I thought that maybe there are many other users of the Pedal who want to do it too and so I did a step by step guide with pictures.
Michael

 

[

Yes, I have already written in Posting 1, which one should best take the newer Versiom 1.1.1.

 

With an original, repackaged G1Xon, you can't save or replay backups.
This was not seen by Zoom in front of the inexpensive device.
With the much older, but then more expensive Zoom G3x, which I no longer have, Zoom has provided a software to edit patches, input or save it off.
Unfortunately not with G1Xon.
So there is ToneLib.
But only with patches that only use the original effects, i.e. patches, where no effects from e.g. the MS50 are intrigued with.
Unfortunately, so too.
Maybe TonLib will adjust this, because the effects are compatible with the device.
So, if you don't want to lose your patches, the patches with non-original G1Xon only analog memory technology leave you: a block and a pencil.
But patches with original effects would have to be saved.

 

Hmmmm.

I still have a ZOOM G2.1KL Kiko Loureiro, but this is the only zoom device where the Kiko patches are installed as standard.
For everyone else you have to see what effects are applied and whether they are also in the G1on, G1Xon or B1Xon.
Have already been able to take some patches/effects from one device to the other, but always only manually with the buttons on the device itself.

I also had the G3X, which used the same editorial software as the G2.1 Kl, because you could easily convert patches for the respective other device.

But unfortunately the software does not work with B1Xon or G1Xon, unfortunately!

 

If they are detected by the software and there is still space in the flash memory, you can certainly still import effects.
Connect the Device to the computer and see if it is found!