Black Album Tone (Mid scooped)

Black Album Tone (Mid scooped)​

Preset name: Black Album mid scoop

Comments:
This is preset is the Mid scooped version of the Black album tone. If you are recording, these should be atleast 2 tracks panned to 75 Right/ 75 Left and a little higher than the Mid present guitars. You can also record 2 more tracks on 15 Right / 15 Left Pan to give it a more present tone.

Related video:


Effects chain:

Spoiler: Preset settings

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
{

"Sens" = 75​

"Mode" = Soft​

}
​

Effect: "Rack Comp" (Dynamics / Filter), active - "yes"
{

"Threshold (dB)" = -32​

"Ratio" = 8​

"Attack" = Fast​

"Release (ms)" = 86​

"Knee" = 37​

"Level (dB)" = 0​

}
​

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off​

"A-Pan" = 31​

"A-Level" = 58​

"B-Bypass" = Off​

"B-Pan" = -33​

"B-Level" = 49​

'A' branch:
{

Effect: "Super OD" (Overdrive / Distortion), active - "yes"
{

"Drive" = 70​

"Tone" = 66​

"Level" = 91​

}
​

Effect: "Slo 100" (Amp simulators), active - "yes"
{

"Gain" = 56​

"Bass" = 84​

"Middle" = 30​

"Treble" = 60​

"Presence" = 75​

"Master" = 68​

"Level (dB)" = 2​

}
​

Effect: "IR Processor" (Cabinets), active - "yes"
{

"IR" = Black_L​

"Low Cut (Hz)" = 0​

"Hi Cut (kHz)" = 20.0​

"Mix" = 100​

"Level (dB)" = 0​

}
​

Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes"
{

"Speed" = 2.0​

"Depth" = 47​

"Center" = 1.7​

"Mode" = Stereo​

}
​

}
'B' branch:
{

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off​

"A-Pan" = -50​

"A-Level" = 59​

"B-Bypass" = Off​

"B-Pan" = 62​

"B-Level" = 51​

'A' branch:
{

Effect: "R-Dist" (Overdrive / Distortion), active - "yes"
{

"Drive" = 64​

"Tone" = 55​

"Level" = 50​

}
​

Effect: "Ms JCM900" (Amp simulators), active - "yes"
{

"Gain" = 69​

"Bass" = 75​

"Middle" = 22​

"Treble" = 60​

"Presence" = 62​

"Master" = 73​

"Level (dB)" = 0​

}
​

Effect: "Cab Sim" (Cabinets), active - "yes"
{

"Model" = 4x12" 1960 T75​

"Level (dB)" = 0​

}
​

Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
{

"31 Hz" = 0​

"62 Hz" = -2​

"125 Hz" = 0​

"250 Hz" = -3​

"500 Hz" = -5​

"1 kHz" = -7​

"2 kHz" = -4​

"4 kHz" = -5​

"8 kHz" = -3​

"16 kHz" = 0​

"Level (dB)" = 0​

}
​

}
'B' branch:
{

Effect: "Dist One" (Overdrive / Distortion), active - "yes"
{

"Drive" = 42​

"Tone" = 59​

"Level" = 37​

}
​

Effect: "Rack Comp" (Dynamics / Filter), active - "yes"
{

"Threshold (dB)" = -20​

"Ratio" = 5​

"Attack" = Fast​

"Release (ms)" = 250​

"Knee" = 25​

"Level (dB)" = 0​

}
​

Effect: "Org Crush" (Amp simulators), active - "yes"
{

"Gain" = 69​

"Bass" = 69​

"Middle" = 16​

"Treble" = 36​

"Presence" = 66​

"Master" = 65​

"Level (dB)" = 0​

}
​

Effect: "Cab Sim" (Cabinets), active - "yes"
{

"Model" = 4x12" Cali v30​

"Level (dB)" = 0​

}
​

}
​

}
​

}
​

}
​

Effect: "Volume" (Dynamics / Filter), active - "yes"
{

"Pedal Pos." = 70​

"Pan" = 0​

}
​

Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
{

"31 Hz" = 3​

"62 Hz" = 2​

"125 Hz" = 3​

"250 Hz" = -3​

"500 Hz" = -6​

"1 kHz" = -5​

"2 kHz" = -4​

"4 kHz" = 2​

"8 kHz" = 3​

"16 kHz" = 2​

"Level (dB)" = 0​

}
​

Note: You will need to download and install the ToneLib-GFX software to use the preset.

 

Hello there, here is the IR used in the preset.

 

Thank you very much Tony and no problem, hope you enjoy the IR or the preset!