SIGNATURE PEDALS ZOOM G1ON-AK G1XON-KL PATCHES / ORIGINAL FIREWIRE

WOW - do not rush. As I understood you already have pedal ZOOM G1ON.
First of all you should download sound effects which are used in this sound patches (taken from MS 50G/B1ON) via program. After that you will need manually to settup sound patches using uploaded sound effects to your pedal.
Files with program are below.
https://drive.google.com/drive/folders/1RAiJBlNnCk4g8QIv564zsMHPm2EkthI8
You should download and install only Zoom Effect Manager - 1.1.0!!!

 

Once installed please read instruction -
https://vk.com/@zoomeffectmanager-instrukciya-zoom-effect-manager-110 - yes it is on Russian - BUT YOU ALWAYS CAN USE GOOGLE TRANSLATE

 

Next step - go to our forum and choose sound patch (from Zoom MS-50g, MS-60B, MS-70CDR, G1on, G1Xon, B1on, B1Xon) you want to setup on your pedal. For example
https://tonelib.net/forums/threads/atmosferic-space.5053/

ON THIS PAGE push to
Spoiler: Patch settings you will see that you will need below

Effect: "TW ROCK" (Amp simulator), active - "yes"
"Gain" = 0
"Tube" = 0
"Level" = 120
"Trebl" = 60
"Middl" = 60
"Bass" = 20
"Prese" = 90
"CAB" =
"OUT" = LINE

Effect: "ICE Delay" (Delay / Reverb), active - "yes"
"TIME" = 787
"F.B" = 100
"MIX" = 48
"INTVL" = +Oct
"SLICE" = SHORT
"BLEND" = 8
"SMEAR" = 11
"DAMP" = 2
"HPF" = 230

Effect: "HD Reverb" (Delay / Reverb), active - "yes"
"Decay" = 90
"Tone" = 5
"Mix" = 89
"PreD" = 71
"HPF" = 7
"Level" = 80
"Tail" = Off

Effect: "ParaEQ" (Dynamics / Filter), active - "yes"
"Freq1" = 320Hz
"Q1" = 8
"Gain1" = -6
"Freq2" = 1.2kHz
"Q2" = 0.5
"Gain2" = 6
"Level" = 60

However on original ZOOM G1ON there is no sound effects:
Effect: "HD Reverb"
Effect: "ICE Delay"
- SO YOU WILL NEED TO DOWNLOAD this sound effect to your pedal via the program

 

AND THE LAST STEP - ONCE YOUR PEDAL WILL BE UPDATED WITH NEW REQUIRED EFFECTS - you will be able to setup sound patch manually - unfortunately as it was noted one post before our TONELIB do not support/recognise sound effects downloaded to the pedal from other different pedals.

 

HOPE above clarification will be enough to understand main idea, howeverif you will still have a questions - please let me know.

Also - once you will receive KL signatured pedal - please make backup of signatured sound patches via tonelib and share with us.
If you will be interest - I will pass instructions to you how to update your pedal to B1XON with original pathces and back to G1XON in one click (HOWEVER FIRST OF ALL WE WILL NEEED TO MAKE BACKUP OF YOUR SOUNDPATCHES - THAT IS NOT TO LOST THEM - DO NO RUSH!)

Best regards - Boris

 

Yes - program really grate - waiting for the same but for my G5N.

Hope soon TONELIB will be updated and will be able to see all sound effects installed on pedal (newermind the model of the pedal).

Re GFX - ACTUALLY. I do not use it...

 

I pass this screen shot to the program maker, will revert once he will reply.

 

Hi, sorry for delay in reply, I was really busy ... Work... I get reply from maker of program regarding error msg on screen shot. He said that it could be problem with cable connection or with pedal...You should try anotger cable or PC. Most probably it could be due to problem with micro usb jack on pedalboard... As I understood you should try to change cable... Hope it will help. I already patched my pedal by this program...and did not had any problems...I'm really sorry, filling guilty that I advised this to you...however its not work as required....If you will need any addition assistance, please let me know