Creeping Death

Creeping Death​

Preset name: Creeping Death

Effects chain:

Spoiler: Preset settings

Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
{

"Drive" = 0
"Tone" = 100
"Level" = 100​

}​

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
{

"Sens" = 54
"Mode" = Hard​

}​

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off
"A-Pan" = -65
"A-Level" = 55
"B-Bypass" = Off
"B-Pan" = 65
"B-Level" = 55
"Width" = 100
'A' branch:
{

Effect: "Ms JCM2000" (Amp simulators), active - "yes"
{

"Gain" = 45
"Bass" = 25
"Middle" = 100
"Treble" = 60
"Presence" = 45
"Master" = 50
"Level (dB)" = 2​

}
Effect: "IR Processor" (Cabinets), active - "yes"
{

"IR" = ride_L_IR
"Low Cut (Hz)" = 82
"Hi Cut (kHz)" = 10.0
"Mix" = 100
"Level (dB)" = 0​

}
Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
{

"160 Hz" = -4
"400 Hz" = 0
"800 Hz" = -6
"1.6 kHz" = 0
"3.2 kHz" = 3
"6.4 kHz" = 7
"12 kHz" = 0
"Level (dB)" = 0​

}​

}
'B' branch:
{

Effect: "Doubler" (Dynamics / Filter), active - "yes"
{

"A-Dly" = 70
"A-Inv" = On
"A-Level" = 80
"B-Dly" = 50
"B-Inv" = On
"B-Level" = 80​

}
Effect: "Ms JCM2000" (Amp simulators), active - "yes"
{

"Gain" = 45
"Bass" = 25
"Middle" = 100
"Treble" = 60
"Presence" = 45
"Master" = 50
"Level (dB)" = 2​

}
Effect: "IR Processor" (Cabinets), active - "yes"
{

"IR" = ride_R_IR
"Low Cut (Hz)" = 82
"Hi Cut (kHz)" = 10.0
"Mix" = 100
"Level (dB)" = 0​

}
Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
{

"160 Hz" = -4
"400 Hz" = 0
"800 Hz" = -6
"1.6 kHz" = 0
"3.2 kHz" = 3
"6.4 kHz" = 7
"12 kHz" = 0
"Level (dB)" = 0​

}​

}​

}​

Effect: "Room Rvb" (Reverberation), active - "yes"
{

"Time" = 4.5
"PreDelay" = 0
"LoDamp" = 46
"HiDamp" = 25
"Mix" = 38​

}​

Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
{

"31 Hz" = 2
"62 Hz" = 3
"125 Hz" = 2
"250 Hz" = 1
"500 Hz" = 0
"1 kHz" = 0
"2 kHz" = 0
"4 kHz" = 0
"8 kHz" = 0
"16 kHz" = -15
"Level (dB)" = 0​

}​

Note: You will need to download and install the ToneLib-GFX software to use the preset.