Hi! There is such a problem. If I assign a volume pedal in the MIDI section, the pedal doesn't work, it shows a value of 0 or 100, but if you assign it via control1 -> PedalPos, everything works. It's the same with the wah pedal. In version 4.3.1, everything worked fine. I would not like to occupy contol1 and control2, they were used for other purposes. In the previous version, when assigning MIDI to the pedal, the value was set to Channel X, midi CC# X, and now it is set to Channel X, midi CC# X, knob, but not works. All the best!