80' METAL SOLUND

Discussion in 'Zoom G1/G1X Four' started by Zsolt Nemeth, Dec 16, 2020.

  1. Zsolt Nemeth

    Zsolt Nemeth New Member

    80' METAL SOLUND

    [​IMG]
    Device: Zoom G1X Four
    Firmware: 2.00

    Name on device: 80' METAL
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    80' METAL SOUND for HEADPHONES.


    Effect: "NoiseGate" (Dynamics), active - "yes"
    "Detect" = GTRIN
    "Depth" = 100
    "Threshold" = 25
    "Decay" = 0

    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 0
    "Boost" = Off
    "Tone" = 77
    "Volume" = 57

    Effect: "DZ DRV" (Amp simulator), active - "yes"
    "Bass" = 50
    "Middle" = 40
    "Treble" = 75
    "Presence" = 70
    "Gain" = 50
    "Volume" = 50
    "Deep" = 75
    "MidCut" = 50

    Effect: "RCT4x12" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 50
    "Hi" = 73
    "Lo" = 41

    Effect: "P-P Delay" (Delay), active - "yes"
    "Time" = 50
    "F.B." = 0
    "Mix" = 70
    "Tail" = Off

    Patch Volume: 50
    DSP Load: 65%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    HaoHongLang and Juez Dredd like this.
  2. DeMentis

    DeMentis New Member

    Thanks for this one. Very cool
     
  3. Juez Dredd

    Juez Dredd New Member

    Great. Thanks
     
  4. Max Devs

    Max Devs New Member

    thank