90 Clean Preset name: 90''s truss Clean Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 83"Mode" = Soft} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 21"Level" = 50} Effect: "Pickup Mod" (Dynamics / Filter), active - "yes" { "Mode" = Phase Out"Tone" = 32} Effect: "Fd Twin" (Amp simulators), active - "yes" { "Gain" = 45"Bass" = 74"Middle" = 66"Treble" = 36"Presence" = 31"Master" = 32"Level (dB)" = 9} Effect: "Rack Comp" (Dynamics / Filter), active - "yes" { "Threshold (dB)" = 6"Ratio" = 1"Attack" = Slow"Release (ms)" = 70"Knee" = 13"Level (dB)" = 0} Effect: "BassEQ" (Dynamics / Filter), active - "yes" { "50 Hz" = 4"120 Hz" = 0"400 Hz" = -1"500 Hz" = -2"800 Hz" = -4"4.5 kHz" = -2"10 kHz" = 2"Level (dB)" = 0} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 2x12" Silver Bell "Level (dB)" = 6} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = 0"A-Level" = 55"B-Bypass" = Off"B-Pan" = 0"B-Level" = 55 'A' branch: { Effect: "Bi-Chorus" (Modulation / Sfx), active - "yes" { "Speed A" = 3.2"Speed B" = 4.0"Depth" = 43"Reso" = 0"Mode" = Parallel"Mix" = 67} } 'B' branch: { Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 498"Feedback" = 50"Tone" = 65"LoDamp" = 19"Mix" = 65} } } Effect: "Bounce Rvb" (Reverberation), active - "yes" { "Time" = 8.6"PreDelay" = 71"LoDamp" = 24"HiDamp" = 42"Mix" = 67} Note: You will need to download and install the ToneLib-GFX software to use the preset.