Acoustic guitar simulation for Zoom G3xnDevice: Zoom G3Xn Firmware: 2.20 Name on device: Acoustic7 Optimized for: Phones/Speaker Effects chain: Patch comments: Simulate acoustic guitar. Neck's pickup position. Nice for rythm and fingerpicking. Pedal volume added. I have set up this effect with a Gibson Les Paul Studio with neck pickup 490R and strings light gauge EXL110! Frequencies responces will be different if you use something elses: pickups and strings gauge. You will have to tweak bass, mid and tone nobs from effects chain to achieve best result! Spoiler: Patch settings Effect: "Aco.Sim" (Overdrive / Distortion), active - "yes" "Top" = 100 "Body" = 100 "Tone" = 100 "Volume" = 100 Effect: "Gt GEQ 7" (Filter), active - "yes" "100 Hz" = -5.0 "200 Hz" = -1.0 "400 Hz" = -5.0 "800 Hz" = -2.0 "1.6 kHz" = -2.0 "3.2 kHz" = -1.5 "6.4 kHz" = -2.0 "Volume" = 100 "100 Hz" = 0.0 "200 Hz" = 0.0 "400 Hz" = 0.0 "800 Hz" = 0.0 "1.6 kHz" = 0.0 "3.2 kHz" = 0.0 "6.4 kHz" = 0.0 "Volume" = 80 "Parameter set" = A Effect: "CloneCho" (Modulation), active - "yes" "Depth" = 2 "Rate" = 4 "Tone" = 30 "Mix" = 10 Effect: "P-P Delay" (Delay), active - "yes" "Time" = 30 "F.B." = 0 "Mix" = 40 "Tail" = Off Effect: "EarlyRef" (Reverb), active - "yes" "Decay" = 1 "Shape" = 5 "Tone" = 10 "Mix" = 80 Effect: "PDL Vol" (Pedal), active - "yes" "Volume" = 100 "Min" = 0 "Max" = 100 "Curve" = APatch Volume: 100 DSP Load: 41% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.