Adam Jones - TOOLDevice: Zoom G1X Four Firmware: 2.00 Name on device: Tool 1 Optimized for: Guitar Amp Effects chain: Patch comments: Tool patch i made for playing tool (suprising i know), works good on all the albums, with a little tweaking on particular songs. Sounds good on my epiphone les paul custom in the bridge position; as a general rule of thumb, i would put your mids to around 12 o'clock and max out the treb (this may vary from amp to amp, but it sounds fine on mine) In the case of wah just copy the preset onto another patch and add wah onto the fx chain! I'm new to this so feedback is appreciated Spoiler: Patch settings Effect: "Gt GEQ 7" (Filter), active - "yes" "100" = 0.5 "200" = 0.5 "400" = 0.5 "800" = 1.0 "1.6k" = 3.5 "3.2k" = 3.5 "6.4k" = 2.5 "VOL" = 90 Effect: "DZ DRV" (Amp simulator), active - "yes" "Bass" = 10 "Middle" = 100 "Treble" = 70 "Presence" = 65 "Gain" = 60 "Volume" = 55 "Deep" = 65 "MidCut" = 0 Effect: "RCT4x12" (Cabinet), active - "yes" "MIC" = OFF "D57: D421" = 50 "Hi" = 66 "Lo" = 50 Effect: "MS 800" (Amp simulator), active - "no" "Input" = HI "Bass" = 0 "Middle" = 100 "Treble" = 77 "Presence" = 62 "Gain" = 59 "Volume" = 80 Effect: "MS4x12GB" (Cabinet), active - "no" "MIC" = ON "D57: D421" = 0 "Hi" = 0 "Lo" = 0Patch Volume: 51 DSP Load: 84% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.