ALMOST AC

Discussion in 'ToneLib-GFX presets' started by LINDSAY ROSS, Jul 2, 2020.

  1. LINDSAY ROSS

    LINDSAY ROSS New Member

    ALMOST AC

    Preset name: SMOOTH DIRT

    Comments:
    I hanker after Angus`s sound in Thunderstruck. Gutsy non fizz ballsy sound of his SG in the solo.

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 50
    "Mode" = Hard
    }

    Effect: "Ms JCM800" (Amp simulators), active - "yes"
    {
    "Gain" = 59
    "Bass" = 60
    "Middle" = 62
    "Treble" = 74
    "Presence" = 62
    "Master" = 100
    "Level (dB)" = 0
    }

    Effect: "AnalogDly" (Delay), active - "yes"
    {
    "Time" = 730
    "Feedback" = 0
    "Tone" = 37
    "Mix" = 49
    }

    Effect: "Spring Rvb" (Reverb), active - "yes"
    {
    "Time" = 7.0
    "PreDelay" = 0
    "LoDamp" = 16
    "HiDamp" = 26
    "Mix" = 34
    }

    Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
    {
    "160 Hz" = 1
    "400 Hz" = -1
    "800 Hz" = 1
    "1.6 kHz" = 0
    "3.2 kHz" = 0
    "6.4 kHz" = 0
    "12 kHz" = 0
    "Level (dB)" = 0
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = V2-Wolverine-d-e906-A2+
    "Low Cut (Hz)" = 27
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Bogner Uberkab (4x12")
    "Mic Position" = Middle
    "Mic Distance" = Near
    "Low Cut (Hz)" = 60
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 1
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files: