And Justice for All toneDevice: Zoom G3n Firmware: 2.20 Name on device: And Justice for All Optimized for: Guitar Amp Effects chain: Patch comments: And Justice for All guitar tone. Best if used with real 4x12 cabinet or modeling amp with amp turned off and only the cabinet model turned on such as a Line 6 Spider V. Utilizing the amp on the Zoom G3N and the cabinet on the external amp. Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN "Depth" = 100 "Threshold" = 100 "Decay" = 0 Effect: "Zen O.DRV" (Overdrive / Distortion), active - "yes" "Gain" = 100 "Tone" = 60 "Voice" = 80 "Volume" = 50 Effect: "Recti ORG" (Amp simulator), active - "yes" "Mode" = VNTG "Bass" = 34 "Middle" = 50 "Treble" = 100 "Presence" = 86 "Gain" = 100 "Volume" = 62 "SOLO" = 5 Effect: "Gt GEQ 7" (Filter), active - "yes" "100 Hz" = -12.0 "200 Hz" = -12.0 "400 Hz" = -12.0 "800 Hz" = -12.0 "1.6 kHz" = -12.0 "3.2 kHz" = 12.0 "6.4 kHz" = -12.0 "Volume" = 80 "100 Hz" = 0.0 "200 Hz" = 0.0 "400 Hz" = 0.0 "800 Hz" = 0.0 "1.6 kHz" = 0.0 "3.2 kHz" = 0.0 "6.4 kHz" = 0.0 "Volume" = 80 "Parameter set" = A Effect: "BlackOpt" (Dynamics), active - "yes" "Comp" = 65 "Lo" = 51 "Hi" = 79 "Volume" = 76Patch Volume: 26 DSP Load: 50% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.