ANGUS SOLO Device: Zoom Ms-50g Firmware: 3.10 Name on device: ANGUS SOLO Optimized for: Phones/Speaker Effects chain: Patch comments: ANGUS CRUNCH TONE. WORKS BEST WITH AN SG. Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 6"DETCT" = GtrIn"Level" = 100 Effect: "Booster" (Overdrive / Distortion), active - "yes" "Gain" = 100"Tone" = 45"Level" = 100 Effect: "GraphicEQ" (Dynamics / Filter), active - "no" "160Hz" = 0"400Hz" = 0"800Hz" = 3"3.2kHz" = 0"6.4kHz" = -4"12kHz" = -5"Level" = 100 Effect: "Hall" (Delay / Reverb), active - "no" "Decay" = 2"Tone" = 10"Mix" = 86"PreD" = 49"Level" = 100"Tail" = Off Effect: "MS 1959" (Amp simulator), active - "yes" "Gain" = 100"Tube" = 70"Level" = 100"Trebl" = 50"Middl" = 40"Bass" = 50"Prese" = 50"CAB" = MS 1959 4x12"OUT" = LINE Effect: "Room" (Delay / Reverb), active - "yes" "Decay" = 10"Tone" = 8"Mix" = 63"PreD" = 19"Level" = 100"Tail" = Off Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.