APS MJt Clean

Discussion in 'ToneLib-GFX presets' started by Audio Pirate Studio, Apr 25, 2020.

  1. Audio Pirate Studio

    Audio Pirate Studio New Member

    APS MJt Clean

    Preset name: APS MJt Clean

    Comments:
    Atypical clean from a JTM45 with stereo image effects.
    Best use with single coil or low gain pick up. It have a break up with humbucker that is possible to control with volume pot.

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 60
    "Mode" = Soft
    }

    Effect: "Compressor" (Dynamics / Filter), active - "yes"
    {
    "Sense" = 33
    "Level" = 63
    }

    Effect: "Ms JTM45" (Amp simulators), active - "yes"
    {
    "Gain" = 20
    "Bass" = 56
    "Middle" = 61
    "Treble" = 69
    "Presence" = 73
    "Master" = 73
    "Level (dB)" = 8
    }

    Effect: "Splitter" (Dynamics / Filter), active - "yes"
    {
    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55

    'A' branch:
    {

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Fender Twin Rev (2x12")
    "Mic Position" = Edge
    "Mic Distance" = Near
    "Low Cut (Hz)" = 70
    "Hi Cut (kHz)" = 20.0
    "Mix" = 97
    "Level (dB)" = 11
    }

    Effect: "Volume" (Dynamics / Filter), active - "yes"
    {
    "Pedal Pos." = 100
    "Pan" = -17
    }
    }
    'B' branch:
    {

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Vox AC30 (2x12")
    "Mic Position" = Edge
    "Mic Distance" = Near
    "Low Cut (Hz)" = 71
    "Hi Cut (kHz)" = 20.0
    "Mix" = 99
    "Level (dB)" = 11
    }

    Effect: "Volume" (Dynamics / Filter), active - "yes"
    {
    "Pedal Pos." = 100
    "Pan" = 18
    }
    }
    }

    Effect: "Splitter" (Dynamics / Filter), active - "yes"
    {
    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55

    'A' branch:
    {

    Effect: "Splitter" (Dynamics / Filter), active - "yes"
    {
    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55

    'A' branch:
    {

    Effect: "PitchShift" (Modulation / Sfx), active - "yes"
    {
    "Pitch" = 0
    "Fine" = -10
    "Tracking" = 111
    "Direct" = 0
    "Effect" = 85
    }

    Effect: "ModDly" (Delay), active - "yes"
    {
    "Time" = Note sync, 1/8
    "Feedback" = 46
    "Tone" = 25
    "Speed" = 4.2
    "Mix" = 100
    }

    Effect: "Volume" (Dynamics / Filter), active - "yes"
    {
    "Pedal Pos." = 63
    "Pan" = -23
    }
    }
    'B' branch:
    {
    }
    }
    }
    'B' branch:
    {

    Effect: "Splitter" (Dynamics / Filter), active - "yes"
    {
    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55

    'A' branch:
    {
    }
    'B' branch:
    {

    Effect: "PhaseShift" (Modulation / Sfx), active - "yes"
    {
    "Shift" = 34
    "Mix" = 81
    }

    Effect: "Mt-Chorus" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 4.5
    "Depth" = 65
    "Time" = 3.5
    "Mix" = 100
    }

    Effect: "Volume" (Dynamics / Filter), active - "yes"
    {
    "Pedal Pos." = 55
    "Pan" = 9
    }
    }
    }
    }
    }

    Effect: "HD Hall Rvb" (Reverb), active - "yes"
    {
    "Time" = 6.9
    "PreLPF" = 42
    "PreDelay" = 107
    "HiDamp" = 53
    "LoGain" = 1.2
    "Mix" = 21
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    SEMENOV and sonar72 like this.