Aynsley Lister - Inside OutPreset name: Aynsley Lister - Iside Out Comments: A blues tone Tried to replicate from the Aynsley's tone in "Inside Out" The single coil HB ST62 used for replicating. A guide for the tone is on Aynsley's page: http://www.aynsleylister.co.uk/index.php/news/comments/gear-blog Try to ajust EQ settings in the amp for your guitar Use Volume and Tone on the guitar while playing Related video: Effects chain: Spoiler: Preset settings Effect: "Cent OD" (Overdrive / Distortion), active - "yes" "Drive" = 0 "Tone" = 70 "Level" = 75 Effect: "Ms JTM45" (Amp simulators), active - "yes" "Gain" = 70 "Bass" = 70 "Middle" = 38 "Treble" = 70 "Presence" = 70 "Master" = 80 "Output" = 50 "Level (dB)" = 0 Effect: "Guitar IRs Cab" (Cabinets), active - "yes" "Model" = Matchless DC30 (2x12") "Mic Position" = Edge "Mic Distance" = Near "Low Cut (Hz)" = 60 "Hi Cut (kHz)" = 20.0 "Mix" = 100 "Level (dB)" = 0 Effect: "Bounce Rvb" (Reverb), active - "yes" "Time" = 6.0 "PreDelay" = 0 "LoDamp" = 16 "HiDamp" = 26 "Mix" = 35 Note: You will need to download and install the ToneLib-GFX software to use the preset.