Balls To The WallPreset name: Balls To The Wall Comments: Yamaha rgx 121z + EMG81 Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Динамика / Фильтр), active - "yes" { "Sens" = 50 "Mode" = Soft} Effect: "Booster" (Динамика / Фильтр), active - "no" { "Gain" = 64} Effect: "T-Scream" (Перегрузка / Искажение), active - "yes" { "Drive" = 34 "Tone" = 48 "Level" = 63} Effect: "Slo 100" (Усилители симуляторы), active - "yes" { "Gain" = 54 "Bass" = 58 "Middle" = 27 "Treble" = 58 "Presence" = 66 "Master" = 34 "Level (dB)" = 5} Effect: "Garage Rvb" (Реверберация), active - "no" { "Time" = 5.2 "PreDelay" = 0 "LoDamp" = 24 "HiDamp" = 97 "Mix" = 43} Effect: "HD Room Rvb" (Реверберация), active - "yes" { "Time" = 5.0 "PreLPF" = 49 "PreDelay" = 0 "HiDamp" = 49 "LoGain" = -0.3 "Mix" = 50} Effect: "IR Processor" (Кабинеты), active - "yes" { "IR" = Cab IR Sample1 "Low Cut (Hz)" = 0 "Hi Cut (kHz)" = 20.0 "Mix" = 100 "Level (dB)" = 9} Note: You will need to download and install the ToneLib-GFX software to use the preset.