baDS1+TS

Discussion in 'Zoom G1on/G1Xon' started by BA Gorimus, Jun 19, 2018.

  1. BA Gorimus

    BA Gorimus New Member

    baDS1+TS

    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: baDS1+TS
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    Combining DS-1 and TS. Works for lead sounds (on a clean amp). Adust patch volume and DS-1 and TS gains (a bit) to taste.


    Effect: "Dist 1" (Overdrive / Distortion), active - "yes"
    "Gain" = 50
    "Tone" = 50
    "Level" = 75

    Effect: "T Scream" (Overdrive / Distortion), active - "yes"
    "Gain" = 75
    "Tone" = 50
    "Level" = 75

    Effect: "Hall" (Delay / Reverb), active - "yes"
    "Decay" = 30
    "Tone" = 5
    "Mix" = 50
    "PreD" = 50
    "Level" = 150
    "Tail" = Off

    Effect: "GraphicEQ" (Dynamics / Filter), active - "yes"
    "160Hz" = -2
    "400Hz" = -2
    "800Hz" = 0
    "3.2kHz" = 0
    "6.4kHz" = 2
    "12kHz" = 2
    "Level" = 150

    Effect: "NoiseGate" (Dynamics / Filter), active - "yes"
    "THRSH" = 5
    "Level" = 50

    Patch Volume: 80


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files:

    saobienorgan likes this.