Banbeg Device: Zoom G3Xn Firmware: 2.20 Name on device: CatchRainB Optimized for: Guitar Amp Effects chain: Patch comments: Godd with a strat Spoiler: Patch settings Effect: "CloneCho" (Modulation), active - "yes" "Depth" = 2"Rate" = 23"Tone" = 100"Mix" = 50 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 0"Boost" = Off"Tone" = 0"Volume" = 100 Effect: "UK 30A" (Amp simulator), active - "yes" "Bass" = 49"Treble" = 38"Cut" = 78"Gain" = 30"Volume" = 84"Depth" = 0"Speed" = 51"SOLO" = 1 Effect: "ParaEQ" (Filter), active - "yes" "Frequency" = 320Hz"Q" = 3.3"Gain" = 0.0"Volume" = 96 Effect: "TapeEcho" (Delay), active - "yes" "Time" = 517"F.B." = 45"Mix" = 34"Tail" = Off Effect: "Spring" (Reverb), active - "yes" "PreD" = 1"Decay" = 17"Mix" = 37"Tail" = On Patch Volume: 80 DSP Load: 62% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.