Bang & Blame (REM) Device: Zoom G3Xn Firmware: 2.20 Name on device: Bangblame Optimized for: Phones/Speaker Effects chain: Patch comments: Designed for an electric ukulele, but will work for electric guitar-- you might need to back off gain a bit. : Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 50"Threshold" = 40"Decay" = 10 Effect: "Octave" (Modulation), active - "yes" "OCT1" = 20"OCT2" = 0"Tone" = 10"Dry" = 100 Effect: "DIST Plus" (Overdrive / Distortion), active - "yes" "Gain" = 60"Volume" = 50"DryMx" = 0"Comp" = ORG Effect: "FD MASTER" (Amp simulator), active - "yes" "Gain" = 50"Bass" = 80"Middle" = 25"Treble" = 40"Fat" = ON"Volume" = 50"TONE" = 50"SOLO" = 3 Effect: "PDL Delay" (Pedal), active - "yes" "InLvl" = 100"Time" = 489"F.B." = 60"Mix" = 60 Effect: "RCT4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 50"Hi" = 50"Lo" = 50 Patch Volume: 90 DSP Load: 47% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
