Bass guitar to sit cleanly in the mix

Discussion in 'ToneLib-GFX presets' started by PaulN, May 10, 2020.

  1. PaulN

    PaulN Member

    Bass guitar to sit cleanly in the mix

    Preset name: Bass

    Comments:
    Adjust the EQ at the start of the chain for your bass guitar - ensure constant volume levels across all strings. Filters applied at the cabinet stage to remove extreme lows and highs.

    Effects chain:
    [​IMG]


    Effect: "BassEQ" (Dynamics / Filter), active - "yes"
    {
    "50 Hz" = -2
    "120 Hz" = -7
    "400 Hz" = 4
    "500 Hz" = 2
    "800 Hz" = 4
    "4.5 kHz" = -1
    "10 kHz" = 0
    "Level (dB)" = 0
    }

    Effect: "Compressor" (Dynamics / Filter), active - "yes"
    {
    "Sense" = 21
    "Level" = 50
    }

    Effect: "Bass SVT" (Amp simulators), active - "yes"
    {
    "Bass Ctrl" = UltraLo
    "Midrange" = 800 Hz
    "Ultra Hi" = Off
    "Bass" = 4
    "Middle" = 1
    "Treble" = 0
    "Volume" = 50
    "Level (dB)" = 0
    }

    Effect: "Bass IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Ampeg SVT 810e (8x10")
    "Mic Position" = Middle
    "Mic Distance" = Middle
    "Low Cut (Hz)" = 80
    "Hi Cut (kHz)" = 3.5
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Room Rvb" (Reverb), active - "yes"
    {
    "Time" = 2.7
    "PreDelay" = 10
    "LoDamp" = 46
    "HiDamp" = 25
    "Mix" = 31
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    Andrun, zzzongo, Luis Arias and 2 others like this.