Bass Sim

Discussion in 'ToneLib-GFX presets' started by badtz_maru, Mar 16, 2021.

  1. badtz_maru

    badtz_maru New Member

    Bass Sim

    Preset name: Bass sim

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 18
    "Mode" = Soft
    }

    Effect: "Pickup Mod" (Dynamics / Filter), active - "yes"
    {
    "Mode" = Humbacker->Single
    "Tone" = 50
    }

    Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
    {
    "160 Hz" = 3
    "400 Hz" = 0
    "800 Hz" = -3
    "1.6 kHz" = -5
    "3.2 kHz" = -8
    "6.4 kHz" = -10
    "12 kHz" = -13
    "Level (dB)" = 0
    }

    Effect: "PitchShift" (Modulation / Sfx), active - "yes"
    {
    "Pitch" = -12
    "Fine" = 0
    "Tracking" = 35
    "Direct" = 10
    "Effect" = 90
    }

    Effect: "Bass SVT" (Amp simulators), active - "yes"
    {
    "Bass Ctrl" = UltraLo
    "Midrange" = 200 Hz
    "Ultra Hi" = Off
    "Bass" = 3
    "Middle" = 0
    "Treble" = -7
    "Volume" = 50
    "Level (dB)" = -5
    }

    Effect: "Bass IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Fender Bassman (2x15")
    "Mic Position" = Middle
    "Mic Distance" = Middle
    "Low Cut (Hz)" = 44
    "Hi Cut (kHz)" = 9.5
    "Mix" = 100
    "Level (dB)" = -4
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    wimberg111, nairel, SEMENOV and 6 others like this.