Bass simulation Device: Zoom G1X Four Firmware: 2.00 Name on device: Bass Sim Optimized for: Phones/Speaker Effects chain: Patch comments: Works best on bridge pickup with low tone (<4). Volume is fairly low, amplifying/distorting the signal makes modulation more noticeable, turn off any overdrives you have before this. Spoiler: Patch settings Effect: "Octave" (Modulation), active - "yes" "OCT1" = 100"OCT2" = 0"Tone" = 3"Dry" = 0 Effect: "LMT-76" (Dynamics), active - "yes" "Input" = 25"Ratio" = 12:1"REL" = 17"Output" = 50 Effect: "Gt GEQ 7" (Filter), active - "yes" "100" = 4.5"200" = 5.0"400" = -0.5"800" = -4.0"1.6k" = -6.0"3.2k" = -9.0"6.4k" = -10.5"VOL" = 100 Effect: "PDL Vol" (Pedal), active - "yes" "Volume" = 100"Min" = 0"Max" = 100"Curve" = A Effect: "MS4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 56"Hi" = 24"Lo" = 76 Patch Volume: 100 DSP Load: 38% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.