Bass Simulator

Discussion in 'Zoom G3n/G3Xn/G5n' started by sabasgr68, Feb 20, 2023.

  1. sabasgr68

    sabasgr68 New Member

    Bass Simulator

    [​IMG]
    Device: Zoom G3Xn
    Firmware: 2.20

    Name on device: Bass Sim 2
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Patch for G3xn.
    Neck Humbucker on a LP style guitar, volume pot full, tone pot zero.
    Tested on headphones.
    Sounded great to my ears.


    Effect: "FD-B4x10" (Cabinet), active - "yes"
    "MIC" = OFF
    "D57: D421" = 50
    "Hi" = 21
    "Lo" = 79

    Effect: "MonoPitch" (Modulation), active - "yes"
    "Shift" = -12
    "Fine" = 0
    "Tone" = 5
    "Balance" = 100

    Effect: "RC Boost" (Overdrive / Distortion), active - "yes"
    "Gain" = 78
    "Bass" = 76
    "Treble" = 40
    "Volume" = 48

    Effect: "Room" (Reverb), active - "yes"
    "PreD" = 100
    "Decay" = 18
    "Mix" = 64
    "Tail" = On

    Effect: "Gt GEQ 7" (Filter), active - "yes"
    "100 Hz" = 12.0
    "200 Hz" = 3.0
    "400 Hz" = -5.0
    "800 Hz" = -12.0
    "1.6 kHz" = -12.0
    "3.2 kHz" = -12.0
    "6.4 kHz" = 2.0
    "Volume" = 72
    "100 Hz" = 0.0
    "200 Hz" = 0.0
    "400 Hz" = 0.0
    "800 Hz" = 0.0
    "1.6 kHz" = 0.0
    "3.2 kHz" = 0.0
    "6.4 kHz" = 0.0
    "Volume" = 80
    "Parameter set" = A

    Effect: "NoiseGate" (Dynamics), active - "yes"
    "Detect" = EFXIN
    "Depth" = 68
    "Threshold" = 54
    "Decay" = 16

    Patch Volume: 90
    DSP Load: 50%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: