BEHRINGER TM300

Discussion in 'ToneLib-GFX presets' started by aether.ghoul, Jul 2, 2021.

  1. aether.ghoul

    aether.ghoul New Member

    BEHRINGER TM300

    Preset name: BEHRINGER TM300

    Comments:
    This preset is for the TUBE AMP MODELER TM300 pedal from BEHRINGER. Connect the pedal directly to the input of your interface and use this preset. Choose the IRs Cab that you want and ajust the output level and the noise reduction.

    Effects chain:
    [​IMG]


    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Fender Deluxe Rev (1x12")
    "Mic Position" = Center
    "Mic Distance" = Near
    "Low Cut (Hz)" = 60
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 70
    "Mode" = Soft
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files: