BLACKMORE 70sDevice: Zoom G1Xon Firmware: 1.21 Name on device: BLACKMORE Optimized for: Phones/Speaker Effects chain: Patch comments: I use it with imported GrayComp as first effect : SUSTN 26 OUT 80 First 50 seconds without the compressor. Spoiler: Patch settings Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 3.2kHz "Q1" = 1 "Gain1" = -6 "Freq2" = 125Hz "Q2" = 2 "Gain2" = -8 "Level" = 52 Effect: "MS 1959" (Amp simulators), active - "yes" "Gain" = 97 "Tube" = 36 "Level" = 150 "Trebl" = 34 "Middl" = 59 "Bass" = 30 "Prese" = 0 "CAB" = ALIEN 4x12 "OUT" = LINE Effect: "TapeEcho" (Delay / Reverb), active - "yes" "Time" = 435 "F.B" = 45 "Mix" = 25 "HiDMP" = 10 "Level" = 100 "Tail" = On Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 250Hz "Q1" = 0.5 "Gain1" = 6 "Freq2" = 4.0kHz "Q2" = 1 "Gain2" = 10 "Level" = 149Patch Volume: 105 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.