BLACKMORE4Device: Zoom G1Xon Firmware: 1.21 Name on device: BLACKMORE4 Optimized for: Phones/Speaker Effects chain: Patch comments: Play Blackmore with this sound, if you can. A littlebe better with GrayComp if you have it. Sustain 86 Out 17 Spoiler: Patch settings Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 3.2kHz "Q1" = 1 "Gain1" = 4 "Freq2" = 125Hz "Q2" = 2 "Gain2" = 4 "Level" = 52 Effect: "160 Comp" (Dynamics / Filter), active - "yes" "THRSH" = -8 "Ratio" = 7.0 "Gain" = 3 "Knee" = Hard "Level" = 34 Effect: "MS 1959" (Amp simulators), active - "yes" "Gain" = 71 "Tube" = 39 "Level" = 150 "Trebl" = 34 "Middl" = 74 "Bass" = 23 "Prese" = 0 "CAB" = MS 1959 4x12 "OUT" = LINE Effect: "TapeEcho" (Delay / Reverb), active - "yes" "Time" = 524 "F.B" = 52 "Mix" = 34 "HiDMP" = 6 "Level" = 108 "Tail" = On Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 250Hz "Q1" = 0.5 "Gain1" = 5 "Freq2" = 4.0kHz "Q2" = 1 "Gain2" = 10 "Level" = 149Patch Volume: 61 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.