Breathe Truss Preset name: Breathe fLOYD Truss Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 34"Level" = 50} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 34} Effect: "Flanger" (Modulation / Sfx), active - "yes" { "Speed" = 2.0"Depth" = 49"Reso" = 35"Center" = 7.7"Offset" = 0.0"Mix" = 75"Reset" = On} Effect: "Phaser" (Modulation / Sfx), active - "yes" { "Model" = MXR Phase 90"Speed" = 5.6"Depth" = 100"Reso" = 26"Freq" = 5.0} Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes" { "Speed" = 4.1"Depth" = 36"Center" = 5.6"Mode" = Stereo} Effect: "Fd Deluxe" (Amp simulators), active - "yes" { "Gain" = 17"Bass" = 55"Middle" = 63"Treble" = 69"Presence" = 65"Master" = 69"Level (dB)" = 6} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Fender Deluxe Rev (1x12")"Mic Position" = Center"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 3} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 316"Feedback" = 32"Tone" = 65"LoDamp" = 19"Mix" = 65} Effect: "Spring Rvb" (Reverberation), active - "yes" { "Time" = 7.0"PreDelay" = 41"LoDamp" = 22"HiDamp" = 26"Mix" = 42} Note: You will need to download and install the ToneLib-GFX software to use the preset.