carlinos3 Preset name: Big Ben3 Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dinámica / Filtro), active - "yes" { "Sens" = 51"Mode" = Hard} Effect: "Noise Gate" (Dinámica / Filtro), active - "yes" { "Mode" = Auto"Depth" = 50"Threshold" = 50"Attack" = 0"Hold" = 5"Decay" = 250} Effect: "B-Scream" (Overdrive / Distorsión), active - "yes" { "Drive" = 100"Tone" = 26"Level" = 76} Effect: "Splitter" (Dinámica / Filtro) { "A-Bypass" = Off"A-Pan" = -100"A-Level" = 58"B-Bypass" = Off"B-Pan" = 100"B-Level" = 58 'A' branch: { Effect: "Ms JCM900" (Simuladores de amplificador), active - "yes" { "Gain" = 100"Bass" = 50"Middle" = 69"Treble" = 50"Presence" = 51"Master" = 60"Level (dB)" = 3} Effect: "IR Processor" (Gabinetes), active - "yes" { "IR" = charv.1_dc"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "Mesa Rect" (Simuladores de amplificador), active - "yes" { "Gain" = 100"Bass" = 50"Middle" = 63"Treble" = 51"Presence" = 78"Master" = 65"Level (dB)" = 0} Effect: "IR Processor" (Gabinetes), active - "yes" { "IR" = charvel-44_dc"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 6} Effect: "BassEQ" (Dinámica / Filtro), active - "no" { "50 Hz" = -1"120 Hz" = 1"400 Hz" = 2"500 Hz" = 2"800 Hz" = 2"4.5 kHz" = 0"10 kHz" = 0"Level (dB)" = 0} } } Effect: "Garage Rvb" (Reverberación), active - "yes" { "Time" = 5.2"PreDelay" = 100"LoDamp" = 0"HiDamp" = 54"Mix" = 52} Note: You will need to download and install the ToneLib-GFX software to use the preset.