Clanky tone

Clanky tone​

​

Device: Zoom B1X Four
Firmware: 2.00

Name on device: Experiment
Optimized for: Guitar Amp

Effects chain:


Patch comments:
I was trying to get a sharp/metallic sound that doesn't sounds saturated but also keeping part of the original tone of the bass. I still don't get a good Wah setting but i'm also thinking on filling its space with another effect, i'm just trying to get an special touch apart from the tone itself.

I use a passive PJ with all volume and tone knobs full up and a Hartke amplifier, i think pick and finger both sound great (but with fingers is the tecnique that makes the metallic sound, like punching punching the strings with the fingertips).

I apologize if something couldn't be understood, i'm not a native english speaker.

Spoiler: Patch settings

Effect: "DYN Comp" (Dynamics), active - "yes"

"Sense" = 3​

"Attack" = Fast​

"Tone" = 85​

"Volume" = 80​

Effect: "RC Boost" (Overdrive / Distortion), active - "yes"

"Gain" = 30​

"Bass" = 25​

"Treble" = 55​

"Volume" = 55​

Effect: "BassWah" (Pedal), active - "no"

"Frequency" = 70​

"Range" = 64​

"Dry" = 76​

"Volume" = 45​

Effect: "Bass DRV" (Overdrive / Distortion), active - "yes"

"Bass" = 45​

"Treble" = 55​

"PRSNC" = 77​

"Blend" = 75​

"Gain" = 35​

"VOL" = 50​

"MID-F" = 500Hz​

"MID" = 100​

Effect: "AMPG SVT" (Amp simulator), active - "yes"

"Bass" = 2.5​

"MID-F" = 400Hz​

"Middle" = 2.5​

"Treble" = 4.5​

"Gain" = 26​

"Ultra" = BOTH​

"Volume" = 50​

Patch Volume: 60
DSP Load: 65%

Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.