CLEAN HW100 Device: Zoom G3Xn Firmware: 2.20 Name on device: Clean C Optimized for: Phones/Speaker Effects chain: Patch comments: This modern lead sound uses XtasyBlue and ModDelay. Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN"Depth" = 84"Threshold" = 30"Decay" = 25 Effect: "TS Drive" (Overdrive / Distortion), active - "no" "Gain" = 33"Boost" = Off"Tone" = 49"Volume" = 46 Effect: "HW 100" (Amp simulator), active - "yes" "Input" = BRILL"Bass" = 41"Middle" = 29"Treble" = 66"Presence" = 100"Gain" = 26"Volume" = 50"SOLO" = 3 Effect: "HW4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 1"Hi" = 57"Lo" = 50 Effect: "ModDelay" (Delay), active - "no" "Time" = 441"F.B." = 10"Mix" = 36"Tail" = On Effect: "Spring" (Reverb), active - "yes" "PreD" = 46"Decay" = 20"Mix" = 13"Tail" = Off Patch Volume: 60 DSP Load: 57% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.