Clean tone by Matchless Device: Zoom Ms-50g Firmware: 3.10 Name on device: Match30Cln Optimized for: Phones/Speaker Effects chain: Patch comments: Matchless DC-30 based clean tone with OptComp and TapeEcho. Turn off TapeEcho in Cutting. Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 8"DETCT" = GtrIn"Level" = 100 Effect: "GraphicEQ" (Dynamics / Filter), active - "yes" "160Hz" = 0"400Hz" = 3"800Hz" = 4"3.2kHz" = 0"6.4kHz" = 2"12kHz" = 0"Level" = 100 Effect: "MATCH 30" (Amp simulator), active - "yes" "Gain" = 16"Tube" = 60"Level" = 80"Trebl" = 60"Middl" = 55"Bass" = 50"Prese" = 65"CAB" = TONE CITY 4x12"OUT" = LINE Effect: "OptComp" (Dynamics / Filter), active - "yes" "Drive" = 7"Tone" = 54"Level" = 30 Effect: "TapeEcho" (Delay / Reverb), active - "yes" "Time" = 460"F.B" = 35"Mix" = 35"HiDMP" = 5"Level" = 100"Tail" = On Effect: "Arena" (Delay / Reverb), active - "yes" "Decay" = 16"Tone" = 7"Mix" = 35"PreD" = 50"Level" = 100"Tail" = On Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
