clean tone dmd amp Preset name: dont think twice+ Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 41"Level" = 37} Effect: "Dmb Drive" (Amp simulators), active - "yes" { "Gain" = 14"Bass" = 75"Middle" = 70"Treble" = 76"Presence" = 100"Master" = 100"Level (dB)" = 20} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = -1"400 Hz" = 3"800 Hz" = 3"1.6 kHz" = 1"3.2 kHz" = 0"6.4 kHz" = 0"12 kHz" = -2"Level (dB)" = -4} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Fender Bassman (2x15")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 2} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 4.0"Depth" = 28"Center" = 4.4"Mix" = 25} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 316"Feedback" = 20"Tone" = 58"LoDamp" = 19"Mix" = 33} Effect: "Bounce Rvb" (Reverberation), active - "yes" { "Time" = 6.2"PreDelay" = 3"LoDamp" = 42"HiDamp" = 27"Mix" = 45} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 33} Effect: "Bass IRs Cab" (Cabinets), active - "no" { "Model" = Ampeg B-15 combo (1x15")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 158"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 4} Note: You will need to download and install the ToneLib-GFX software to use the preset.
