CLEANICA

Discussion in 'Zoom G1on/G1Xon' started by LS metalriffs, Dec 7, 2019.

  1. LS metalriffs

    LS metalriffs New Member

    CLEANICA

    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: CLEANICA
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    CLEAN INTROS. All Creds to the dude that did CLEAN METL. This is with DuoPhase added.


    Effect: "DuoPhase" (Modulation / Sfx), active - "yes"
    "RateA" = 2
    "RateB" = 4
    "Level" = 76
    "ResoA" = 1
    "ResoB" = 2
    "Link" = STR
    "DPT_A" = 34
    "DPT_B" = 27

    Effect: "FD COMBO" (Amp simulators), active - "yes"
    "Gain" = 0
    "Tube" = 24
    "Level" = 87
    "Trebl" = 8
    "Middl" = 32
    "Bass" = 81
    "Prese" = 3
    "CAB" = MS CRUNCH 4x12
    "OUT" = STACK POWER AMP

    Effect: "StereoCho" (Modulation / Sfx), active - "yes"
    "Depth" = 80
    "Rate" = 29
    "Mix" = 60
    "Tone" = 7
    "Level" = 100

    Effect: "Arena" (Delay / Reverb), active - "yes"
    "Decay" = 15
    "Tone" = 7
    "Mix" = 56
    "PreD" = 90
    "Level" = 100
    "Tail" = Off

    Effect: "GraphicEQ" (Dynamics / Filter), active - "yes"
    "160Hz" = 3
    "400Hz" = 4
    "800Hz" = 5
    "3.2kHz" = 5
    "6.4kHz" = -3
    "12kHz" = -2
    "Level" = 100

    Patch Volume: 120


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: