Crazy Rhoad Device: Zoom G1on Firmware: 1.21 Name on device: CrazyRhoad Optimized for: Phones/Speaker Effects chain: Patch comments: It's a patch with the Randy tone. You must select the bridge hambucker pick up with volumen between 5-7, if u have single coil i recommend middle + bridge. For crazy train you can active the graphic eq for the solo time (it cuts in the mix). Es un parche para sacar el tono de Randy Rhoads en la epoca con Ozzy. Es ideal tocarlo con unos doble bobina, si tenes pastillas simple a veces mejora usar el del puente + el del medio. El volumen lo recomiendo entre 5-7 para que sea controlable y definido. El Eq esta puesto para activarlo en el momento del solo. Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 11"DETCT" = GtrIn"Level" = 100 Effect: "Dist+" (Overdrive / Distortion), active - "yes" "Gain" = 65"Tone" = 40"Level" = 135 Effect: "MS CRUNCH" (Amp simulators), active - "yes" "Gain" = 30"Tube" = 30"Level" = 100"Trebl" = 65"Middl" = 40"Bass" = 50"Prese" = 50"CAB" = BG DRIVE 4x12"OUT" = LINE Effect: "GraphicEQ" (Dynamics / Filter), active - "no" "160Hz" = 0"400Hz" = 0"800Hz" = 3"3.2kHz" = 3"6.4kHz" = 3"12kHz" = 0"Level" = 120 Effect: "StereoCho" (Modulation / Sfx), active - "yes" "Depth" = 30"Rate" = 34"Mix" = 30"Tone" = 6"Level" = 100 Patch Volume: 90 Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.