Creeping Death Preset name: Creeping Death Effects chain: Spoiler: Preset settings Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 0"Tone" = 80"Level" = 100} Effect: "Pickup Mod" (Dynamics / Filter), active - "no" { "Mode" = Single->Humbacker"Tone" = 70} Effect: "Noise Gate" (Dynamics / Filter), active - "no" { "Mode" = Auto"Depth" = 50"Threshold" = 50"Attack" = 0"Hold" = 5"Decay" = 635} Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Soft} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -100"A-Level" = 55"B-Bypass" = Off"B-Pan" = 100"B-Level" = 55"Width" = 100 'A' branch: { Effect: "Doubler" (Dynamics / Filter), active - "yes" { "A-Dly" = 67"A-Inv" = On"A-Level" = 100"B-Dly" = 43"B-Inv" = Off"B-Level" = 100} Effect: "Ms JCM900" (Amp simulators), active - "yes" { "Gain" = 47"Bass" = 61"Middle" = 17"Treble" = 75"Presence" = 62"Master" = 50"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Ride_IR"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "Ms JCM2000" (Amp simulators), active - "yes" { "Gain" = 41"Bass" = 65"Middle" = 29"Treble" = 79"Presence" = 78"Master" = 52"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Ride_IR"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } } Effect: "HD Chamber Rvb" (Reverberation), active - "yes" { "Time" = 8.2"PreLPF" = 79"PreDelay" = 61"HiDamp" = 21"LoGain" = -2.1"Mix" = 37} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 5"250 Hz" = -2"500 Hz" = -3"1 kHz" = 6"2 kHz" = 4"4 kHz" = 1"8 kHz" = 0"16 kHz" = 15"Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.