Crunchy metal soundDevice: Zoom B1 Four Firmware: 2.00 Name on device: B7K Metal Optimized for: Bass Amp Effects chain: Patch comments: Crunchy metal sound using a compressor, B7K pre-amp, optional B3K OD, Noise Gate and Ampeg SVT amp sim. Recommended gear: - Precision bass (Or PJ with bridge (single coil) pickup volume at 0) - Pick Spoiler: Patch settings Effect: "DualComp" (Dynamics), active - "yes" "Frequency" = 900 "LoCMP" = 36 "HiCMP" = 18 "Volume" = 75 Effect: "Dark Pre" (Overdrive / Distortion), active - "yes" "Bass" = 57 "L-MID" = 48 "H-MID" = 57 "Treble" = 59 "Blend" = 69 "Gain" = 58 "VOL" = 30 "Boost" = HI Effect: "Dark OD" (Overdrive / Distortion), active - "no" "Gain" = 53 "Attack" = Boost "Blend" = 62 "Volume" = 48 Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN "Depth" = 100 "Threshold" = 80 "Decay" = 0 Effect: "AMPG SVT" (Amp simulator), active - "yes" "Bass" = 3.5 "MID-F" = 450Hz "Middle" = 0.0 "Treble" = 2.0 "Gain" = 25 "Ultra" = OFF "Volume" = 55Patch Volume: 100 DSP Load: 81% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.