David Gilmore

Discussion in 'Zoom G1/G1X Four' started by Boscorelli, May 16, 2019.

  1. Boscorelli

    Boscorelli Member

    David Gilmore

    Device: Zoom G1X Four
    Firmware: 1.10

    Name on device: Gilmore
    Optimized for: Phones/Speaker

    Effects chain:

    Patch comments:
    Time Solo.
    I converted a patch that Andrew Miles posted for the Zoom G5n.

    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = EFXIN
    "Depth" = 100
    "Threshold" = 54
    "Decay" = 0

    Effect: "NYC Muff" (Overdrive / Distortion), active - "yes"
    "Sustain" = 100
    "Tone" = 60
    "Balance" = 80
    "Volume" = 58

    Effect: "Delay" (Delay), active - "yes"
    "Time" = 374
    "F.B." = 60
    "Mix" = 45
    "Tail" = On

    Effect: "Church" (Reverb), active - "yes"
    "PreD" = 96
    "Decay" = 49
    "Mix" = 46
    "Tail" = Off

    Patch Volume: 100
    DSP Load: 53%

    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.

    Attached Files:

    zaganis and bryan moore like this.
  2. bryan moore

    bryan moore New Member

    Excellent patch; use it all the time!
  3. Mark Ortiz

    Mark Ortiz New Member

    How can I download the church pedal?
  4. mcyzyk

    mcyzyk New Member

    I too would like to know where to download "Church".

  5. Boscorelli

    Boscorelli Member

    If you have a G1X Four, the Church pedal is under Reverb
  6. mcyzyk

    mcyzyk New Member

    Thanks! Much appreciated.

    The reason I ask is because the "Church" effect has a big X on it in that patch. When I click it it indicates that the effect does not exist. Trying to solve...

    A newby,

  7. Boscorelli

    Boscorelli Member

    You need to install Church on the G1X Four. (click the Green chevron on the effect)
  8. omegaprime

    omegaprime New Member

    do you have any rockabilly style patches