Death Metal Rythem Device: Zoom G1X Four Firmware: 2.00 Name on device: DeathMetal Optimized for: Phones/Speaker Effects chain: Patch comments: Bridge Pickup, 6 String and or 7 String.. I tried to base the sound on a Deicide style. This sounds good for rythem but not for solos. Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN"Depth" = 100"Threshold" = 59"Decay" = 0 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 0"Boost" = On"Tone" = 50"Volume" = 100 Effect: "DZ DRV" (Amp simulator), active - "yes" "Bass" = 50"Middle" = 60"Treble" = 50"Presence" = 40"Gain" = 100"Volume" = 60"Deep" = 0"MidCut" = 60 Effect: "RCT4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 0"Hi" = 50"Lo" = 50 Effect: "Gt GEQ 7" (Filter), active - "yes" "100" = 8.5"200" = 1.0"400" = -3.0"800" = -6.0"1.6k" = 0.0"3.2k" = 3.0"6.4k" = 8.5"VOL" = 50 Patch Volume: 97 DSP Load: 63% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.