Detune ChorusDevice: Zoom G1Xon Firmware: 1.21 Name on device: DETUNECHho Optimized for: Phones/Speaker Effects chain: Patch comments: Rocky chorus sound for vintage level singlecoils. I'm useing it with imported CloneChorus effect with original setup. Spoiler: Patch settings Effect: "Detune" (Modulation / Sfx), active - "yes" "Cent" = 10 "PreD" = 0 "Mix" = 100 "Tone" = 8 "Level" = 121 Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 63Hz "Q1" = 1 "Gain1" = 8 "Freq2" = 4.0kHz "Q2" = 0.5 "Gain2" = 11 "Level" = 54 Effect: "FD VIBRO" (Amp simulators), active - "yes" "Gain" = 50 "Tube" = 30 "Level" = 142 "Trebl" = 33 "Middl" = 76 "Bass" = 22 "Prese" = 2 "CAB" = ALIEN 4x12 "OUT" = LINE Effect: "TapeEcho" (Delay / Reverb), active - "yes" "Time" = 435 "F.B" = 45 "Mix" = 25 "HiDMP" = 10 "Level" = 100 "Tail" = On Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 200Hz "Q1" = 0.5 "Gain1" = 6 "Freq2" = 3.2kHz "Q2" = 1 "Gain2" = 10 "Level" = 100Patch Volume: 61 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.