Diezel Lead FRFR Device: Zoom G5n Firmware: 3.00 Name on device: Dzl LeadBg Optimized for: Phones/Speaker Effects chain: Patch comments: Main FRFR Lead patch for metal, using Bogner cab. Spoiler: Patch settings Effect: "BlackWah" (Pedal), active - "no" "Frequency" = 50"Range" = 50"Dry" = 0"Volume" = 88 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 0"Boost" = Off"Tone" = 60"Volume" = 95 Effect: "DZ DRV" (Amp simulator), active - "yes" "Bass" = 41"Middle" = 70"Treble" = 60"Presence" = 40"Gain" = 26"Volume" = 87"Deep" = 37"MID CUT" = 0 Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 40"Threshold" = 24"Decay" = 6 Effect: "Delay" (Delay), active - "yes" "Time" = 531"F.B." = 28"Mix" = 23"Tail" = Off Effect: "BGN4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 50"Hi" = 55"Lo" = 30 Effect: "Room" (Reverb), active - "yes" "PreD" = 5"Decay" = 10"Mix" = 20"Tail" = Off Patch Volume: 28 DSP Load: 78% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.