Dimmebag live Tone Device: Zoom G1 Four Firmware: 2.00 Name on device: DIMME LIVE Optimized for: Phones/Speaker Effects chain: Patch comments: Diezel patch Hi gain, similar to Dimmebag Darrell´s Live tone Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 82"Threshold" = 61"Decay" = 2 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 0"Boost" = Off"Tone" = 57"Volume" = 82 Effect: "DZ DRV" (Amp simulator), active - "yes" "Bass" = 50"Middle" = 53"Treble" = 50"Presence" = 48"Gain" = 28"Volume" = 52"Deep" = 0"MidCut" = 28 Effect: "DZ4x12F" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 50"Hi" = 47"Lo" = 50 Effect: "Gt GEQ 7" (Filter), active - "no" "100" = 0.0"200" = 0.0"400" = 0.0"800" = 0.0"1.6k" = 0.0"3.2k" = 5.0"6.4k" = 0.0"VOL" = 80 Patch Volume: 99 DSP Load: 63% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
Hi, I'm pretty new to Zoom, and effects, actually, so please don't mind me asking: what's the point in having the EQ - or any other effect - in the effects chain if it's supposed to be inactive/bypassed? Will it affect the tone somehow?