Dist-2

Discussion in 'ToneLib-GFX presets' started by carlinos3, Dec 19, 2020.

  1. carlinos3

    carlinos3 Active Member

    Dist-2

    Preset name: Dist-2

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dinámica / Filtro), active - "yes"
    {
    "Sens" = 100
    "Mode" = Soft
    }

    Effect: "IR Processor" (Gabinetes), active - "yes"
    {
    "IR" = preo_dc
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 3
    }

    Effect: "T-Scream" (Overdrive / Distorsión), active - "yes"
    {
    "Drive" = 22
    "Tone" = 80
    "Level" = 79
    }

    Effect: "Ms JCM2000" (Simuladores de amplificador), active - "yes"
    {
    "Gain" = 100
    "Bass" = 50
    "Middle" = 50
    "Treble" = 50
    "Presence" = 50
    "Master" = 71
    "Level (dB)" = 4
    }

    Effect: "IR Processor" (Gabinetes), active - "yes"
    {
    "IR" = charv.1_dc
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 5
    }

    Effect: "Vib Delay" (Modulación / Sfx), active - "yes"
    {
    "Speed" = 4.2
    "Depth" = 0
    "Feedback" = 0
    "Time" = 6.0
    "Mix" = 37
    "Mode" = 0
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    HelIlcat likes this.