Drive For Solo Device: Zoom G5n Firmware: 3.00 Name on device: solo drive Optimized for: Phones/Speaker Effects chain: Patch comments: maked this drive for solo Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 79"Threshold" = 39"Decay" = 15 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 100"Boost" = On"Tone" = 55"Volume" = 100 Effect: "XtasyBlue" (Amp simulator), active - "yes" "Bass" = 48"Middle" = 34"Treble" = 64"Presence" = 62"STRCT" = HI"Gain" = 100"Volume" = 19"SOLO" = 3 Effect: "PitchSHFT" (Modulation), active - "no" "Shift" = -1"Fine" = 0"Tone" = 10"Balance" = 100 Effect: "BGN4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 22"Hi" = 63"Lo" = 48 Effect: "AnalogDly" (Delay), active - "yes" "Time" = 376"F.B." = 23"Mix" = 44"Tail" = Off Effect: "Plate" (Reverb), active - "yes" "PreD" = 9"Decay" = 18"Mix" = 31"Tail" = Off Patch Volume: 70 DSP Load: 72% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.