Eddie Van Halen, EVH, Brown tone

Discussion in 'Zoom G1/G1X Four' started by aum, Mar 25, 2023.

  1. aum

    aum New Member

    Eddie Van Halen, EVH, Brown tone

    [​IMG]
    Device: Zoom G1X Four
    Firmware: 2.00

    Name on device: EVH
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Hello, First patch here! If anything is wrong please do let me know. This is as far as I could get to the brown tone, PLEASE NOTE: Plate reverb is required, I couldn't fit it in here but I have a delay pedal that my amp can simulate so I use that instead. Bridge humbuckers are advisable. I run the G1x4 into a practice amp (Blackstar ID core 10 v3)


    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 20
    "Boost" = Off
    "Tone" = 50
    "Volume" = 100

    Effect: "Phaser" (Modulation), active - "no"
    "Color" = INV 4
    "Depth" = 68
    "Rate" = 8
    "Resonance" = 20

    Effect: "MS 1959" (Amp simulator), active - "yes"
    "Bass" = 50
    "Middle" = 70
    "Treble" = 60
    "Presence" = 40
    "Input1" = 100
    "Input2" = 20
    "Volume" = 80

    Effect: "MS4x12GB" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 0
    "Hi" = 60
    "Lo" = 20

    Effect: "P-P Delay" (Delay), active - "yes"
    "Time" = 246
    "F.B." = 0
    "Mix" = 45
    "Tail" = Off

    Patch Volume: 80
    DSP Load: 70%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: